Carbide Round Bar Standard Ubungakanani obuphezulu Umgangatho oPhezulu weTungsten Round Bar

Carbide Round Bar Standard Standard Umgangatho ophezulu Tungsten Round Bar Umfanekiso Featured

Inkcazelo emfutshane:

Uphawu: XINFA
Izinto eziphathekayo: i-carbide
Umbala: Silver
Ubume: umqheba othe ngqo
Ubungakanani bomyalelo: 1pc
Ixabiso: 0.5-15dollar
Imveliso nganye
Ubude * ububanzi * ubude: 10×1.5×1.5 cm
Ubunzima obupheleleyo bempahla yorhwebo nganye: 0.020 kg
Umhla wokuhanjiswa kunye neentsuku ezingama-20
-Bangaphi ngaphantsi kwama-2000
Ubuninzi obunye
Inani leisampulu 2
Isampulu yexabiso leyunithi 2

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

Inzuzo

1. I-arc igudileyo, i-surface ilula, akulula ukuyivimba, kwaye iyanciphisa ukuveliswa kobushushu
2. Sebenzisa izinto eziphezulu ze-alloy njengomzimba wentonga ukwandisa ubomi benkonzo kunye nokwandisa ukugqiba
3. Akukho lula ukugqoka, izinto eziphezulu, amandla aphezulu, ukuphelisa inkathazo yokutshintshwa rhoqo
Usetyenziso oluCetyisiweyo
YG10X
Sebenzisa ngokubanzi, kunye nobunzima obuhle bokushisa.Ifanele i-milling kunye ne-drilling intsimbi jikelele
phantsi kwe-45 HRC kunye ne-Aluminium, njl njl kwisantya esisezantsi sokusika.Ncoma ukuba usebenzise oku
ibakala lokwenza ii-twist drills, ii-mills end, njl.
ZK30UF
Ifanelekile ukugaya kunye nokubhoboza intsimbi jikelele phantsi kwe-HRC 55, intsimbi ephonsiweyo, engenasici
intsimbi, ingxubevange yealuminiyam, njl. Cebisa ukwenza iidrili, izisiki zokugaya, iireamers
kunye neempompo.
GU25UF
Ifanelekile kwi-alloy ye-titanium yokugaya, intsimbi eqinile, i-alloy refractory phantsi kwe-HRC 62. Ncoma ukuba wenze ii-mills zokugqibela ngesantya esiphezulu sokusika kunye ne-reamer.

Iingenelo

I-1.Ukusebenzisa ngaphezu kwe-99.95% yococeko oluphezulu lwe-tungsten carbide powder, inamandla angcono kunye nobunzima obudibeneyo kunye nobomi benkonzo obude kunobuqhelekileyo.
2. Ukusebenzisa i-ultrafine yobukhulu beenkozo ze-tungsten carbide powder ukuvelisa, Ubunzima bunokufikelela kwi-HRA93.6, amandla okugoba anokufikelela
4000N/mm²
3.Ukunyamezela kunokufikelela ku ±0.001mm, ukuthe tye kunokufikelela ku ±0.02mmKutheni sikhethe thina:
1.High Quality Carbide Rods ISO9001 eqinisekisiweyo
2.Ukucinezela ngokuzenzekelayo, iteknoloji ye-HIP sintering
I-3.Ukumelana ne-abrasion enhle kunye nobunzima obuphezulu
Inkonzo ye-4.Prompt aftersales phakathi kweeyure ezingama-24
I-5.OEM kunye nomyalelo owenziwe ngokwezifiso wamkelwe
6.I-Diameter ukusuka kwi-3-25mm, ubude obupheleleyo 20mm ukuya kwi-330mm
I-7.Ifanelekile ukwenza ii-drill bits, i-end Mills, i-reamers kunye nezixhobo ze-PCB njl.

IBanga	Umxholo weCobalt Co %	Ubungakanani benkozo	Uxinaniso/cm3	UbunzimaHRA	I-TRSN/mm2
YG10X	10	0.8	14.6	91.5	3800
ZK30UF	10	0.6	14.5	92	4200
GU25UF	10	0.4	14.3	92.5	4300

Ngaphambili: I-BT-MTA MTB Morse Taper Tool Holder MT2 End Mill Holder

Okulandelayo: CNC High Precision Milling Tool Holder

Q1: Ndingayifumana isampuli yovavanyo?
A: Ewe, sinokuxhasa isampuli.Isampulu iya kuhlawuliswa ngokufanelekileyo ngokwengxoxo phakathi kwethu.

I-Q2: Ngaba ndingayongeza i-logo yam kwiibhokisi / iibhokisi?
A: Ewe, i-OEM kunye ne-ODM ziyafumaneka kuthi.

Q3: Ziziphi iingenelo zokuba ngumthengisi?
A: Isaphulelo esikhethekileyo sokhuseleko lwentengiso.

Q4:Ungawulawula njani umgangatho weemveliso?
A: Ewe, sineenjineli ezilungele ukuncedisa abathengi abaneengxaki zenkxaso yezobuchwepheshe, nayiphi na imiba enokuthi ivele ngexesha lokucaphula okanye ukufakwa kwenkqubo, kunye nenkxaso ye-aftermarket.I-100% yokuzihlola ngaphambi kokupakisha.

I-Q5: Ngaba ndingandwendwela umzi-mveliso wakho ngaphambi komyalelo?
A: Ngokuqinisekileyo, wamkelekile utyelelo lwakho lwefektri.